Custom 15 Watt Class A valve head. Two channels.
Includes footswitch, cover and cables.
Great condition! Only 12 months old. Minimal use.

More from VOX


ValveTone - YP15

Australian made, fully hand wired point-to-point.
All valve, fifteen watts, 2 x 6V6GT, 3 x 12AX7
Marshall JCM800 2204 Themed
Single input, with pad switch to adjust gain
Wide tonal choice with 3-way tonestack plus presence control
Master Volume controls level without substantial tone change
8 and 16 ohm speaker outputs, can also drive 4 ohm cabs
New with 12 month warranty

More from ValveTone


Rola - Deluxe

Hand made in South Australia, 14 watt tweed deluxe style valve head, (6inch speaker built in for practice). Running 1 x 12Ax7 and 2 x 6P6P (6V6) tubes. Cool unit!

More from Rola


MESA/Boogie - Lone Star

Class A/B Valve switchable 50/100 watt, dual reverb head. Includes matching Lone Star 2x12 cabinet! With Covers, and Footswitch!

More from MESA/Boogie


Fi-Sonic - Head

Made in Sydney mid 1960s, 40 watt two channel with trem, hefty transformers and EL34 power tubes for a huge rock sound, fully serviced.

More from Fi-Sonic


Vadis - LB60

Made in Australia 1960s, two channel 40W valve head! Solid State Rectifier.

More from Vadis

ON LAYBY Enquire

Electravox - BR-40

Vintage late 60s early 70's Made in Australia! All valve head running 2 x EL34 output tubes, Features 5AR4 tube rectifier 20~30 Watts. About 8Ω output. with Electavox 40w Speaker Cabinet, 2x12 Plessey 12peg speakers.

More from Electravox


Marshall - MA100H

100W of all-tube Marshall tone, 2 channels, 3 ECC83 preamp tubes, 4 EL34 power tubes, Independent volume and 3-band EQ controls per channel. With Marshall Double footswitch.

More from Marshall


Marshall - DSL 15H

Dual Super Lead.15 watt valve head.

More from Marshall


Terrible Amps - Guitar Head

Valve head, 5 Watt + Hand Made Boutique Point to Point Wiring - Made in Australia - 8 ohm/240 volt.

More from Terrible Amps



Vintage 1981 CUSTOM HIWATT 100 DR 103, EL-34s, Partridge transformers, slave output, an original very awesome beast!

More from HIWATT


Ampeg - GVT5H

5 watt valve head with 1 x 6V6. Super clean sound.

More from Ampeg


ValveTone - Feldspar 20

• Australian made, hand-wired, point-to-point.
• All valve, 20 watts, using 2 x EL34, 3 x 12AX7 valves.
• 'VOX themed', with 2-way tone and cut control.
• Master volume to control level without substantial tone change.
• 8 and 16 ohm speaker outputs, but can also drive 4 ohms cabs.
• Prototye/Demonstration amplifier with 3 month warranty.

More from ValveTone


ValveTone - Jasper 20

* Australian made, hand-wired, point-to-point * All valve, 20 watts, using 2 x EL34, 3 x 12AX7 * Marshall JCM800 theme * High and Low Gain inputs * Three-way tonestack plus presence control * Master Volume control to allow overdive at any volume * 8 and 16 ohm speaker outputs, but can also drive 4 ohm cabs

More from ValveTone


Park - 100W Super Lead

Made in UK 1979 by Marshall, these are Marshall amps badged Park to bypass their distributor and get more profit. 4 input, with added Master Volume, modern impedance switch, replaced Badge. Awesome, legendary JMP Super Lead tones.

More from Park


Mesa/Boogie - Dual Rectifier SOLO HEAD

100 Watt Valve Head. 3 channel. 4/8/16Ω.
* 110 volt - USA voltage. Requires step-down transformer (Not included).
Full service and re-valve by David Aurora 18 months ago. Only light use since. w/ speaker cable

More from Mesa/Boogie

ON LAYBY Enquire

Ceriatone - Overtone Special

Spec for Spec clone of a Dumble Amplifier! Studio use only. 50 Watts of Tube power! 2 x 6L6 output stage! Features Impedance selection, Overdrive , Effects loop, Footswitchable Preamp Boost and overdrive and a plethora of tonal options! Palmer PDI-09 “The Junction” Cabinet Simulator and a Weber 50W speaker load (mounted within the head). "Incredibly full sounding clean sound without being overly dark or tubby" w/ foot switch

More from Ceriatone


Traynor - YCS50H

Custom Special 50H. 2 channel 50 watt all valve head.
Running EL34 power tubes. Switchable 15 or 50 watts.
Designed and manufactured in Canada by Yorkville Sound. * Reverb intermittent and very weak

More from Traynor


WASP - 100 Watt Head

2 channel Head made in Sydney early 70s, with Bassman style channel and Marshall style channel, running a quartet of EL34s. Output transformer rewired to original spec. Probably a custom model as EL34s unusual and transformer designed for more bass response.

More from WASP


Friedman - Small Box 50

50 watt 2 channel all valve head. Hand wired in USA. Running EL-34 power tubes. Two master volumes and two gain controls.
Includes single button footswitch

More from Friedman



100 watt valve head, EL34s, reverb, with manual and Vox twin footswitch.

More from VOX


Valvetone - IMPACT MkIV

Australian made, hand wired, point-to-point.
All valve 2 watts, using 2 x 6F4P and 1 x 12AX7
Master Volume control. 8 hm speaker output, can also drive 4 or 16 ohm cabs.
Enhanced gain control available using a two button footswitch (not included)
Single tone control, augmented by 3-way 'gain' and 'bright' switches
Line Out socket for connection to mixing desk or larger amp
Includes spare set of 6F4P output valves
BRAND NEW with 12 Month Warranty
Check out: http://www.valvetone.com.au/ **Installed in a "basic but robust" raw pine sleeve

More from Valvetone

NEW Enquire

Marshall - JCM 2000 TSL 60

Triple Super Lead 60 watt 3 channel All Valve Head. Includes 5 way foot switch

More from Marshall


ValveTone - Juno 25

• '59 Bassman themed.
• 8 and 16 ohm speaker outputs, but can also drive 4 ohm cabs.
• All valve. 25 watts. Using 2 x 6L6GC, 2 x 12AX7 and 1 x 12AY7.
• Australian made, hand-wired, point-to-point.
• Master Volume control to allow overdrive at any volume.
• Mixable bright and dark input channels.
• Three-way tonestack plus presence control.
• PROTOTYPE with 3 month warranty.

More from ValveTone

SOLD Enquire

Paul Reed Smith - SE 30

2012 30 watt All Valve head. Two channels and onboard Reverb..
Running Tungsol 5881 power valves and JJ 12AX7 preamp valves.
Effects Loop with Line or Pedal Level Selector Switch
Fixed Bias with Test Jacks & Adjustment Pot
4, 8, 16 Ohm Selection with Two Output Jacks
Includes 2-way foot switch

More from Paul Reed Smith



100 watt 2 channel Class A Valve. Switchable 6L6 / EL34 output valves. *New EHX Tubes Made in England.

More from Orange


Jet City - Jet City 20

20 watt Class A Valve head, EL84 output tubes. Designed by Soldano, with depth switch, bright and gain Friedman style mods

More from Jet City


Migliore - 5E3

Fender 5E3 Deluxe clone, head, NFB control, 6V6 pair for approx 15 watts, hand wired in Melbourne.

More from Migliore


Peavey - 6505+

120 watt 2 channel All valve Made in USA. Anniversary Peavey series based on 5150! INCLUDES Peavey 6505 4x12" speaker box

More from Peavey

HOLD Enquire

Mesa/Boogie - Dual Rectifier

Solo Head. 100 punishing Watts of Awesome. 3 channel. 4/8/16Ω.
* 110 volt - USA Voltage, requires step down transformer (Not included).

More from Mesa/Boogie


Lenard - SGB 200

1970's Made in Australia! 200 watts Vintage Valve Head Running a quartet of EL34's - HUGE Transformers! All Original (Case has been reinforced with heavy duty plastic corners). Loud!!!

More from Lenard


Jet City - JCA100HDM

00HDM Amp Head is two channels of Soldano tone and 100 watts of pure tube power. The Crunch channel has plenty of headroom to deliver clear, bright clean tones and can be driven hard enough to get downright raunchy. The Overdrive channel is the circuit that made Soldano famous. The 100W/50W brings the pain from four 6L6 output tubes in 100W mode, or in 50W mode two tubes are turned off causing the power section to work harder to reach the desired output level, resulting in some pretty hot power amp distortion.

More from Jet City


Kustom - '72 Coupe Hardtop

72 watt All valve head. Two channels with Reverb (no go), tremolo & Vibrato. Comes with Matching 3-way footswitch. Reputed to "Reproduce classic Fender and heavy Marshall tones".

More from Kustom


Valvetone - The Donald MkII

All valve head, 15 watts, using 2 x 6V6GT output valves.
Australian made, hand-wired, fully point-to-point construction.
Presidential theme (but does have an overall Fender amp voicing).
Preamp valves are NOS Russian 6N2P. Yes there is a Russian connection...
Comprehensive tone and gain control using 3-way EQ and 3 switches.
Socket for two button foot switch, allowing two increments of gain boost (foot switch not included with amp).
Bigly control to set master volume level without substantial tone change.
Works well with pedals.
NEW with 12 month warranty - except valves which have a 1 month warranty.
* Disclaimer: The name of the amplifier - The Donald - does not (or might not) have any potential (or actual) association with any sentient being which may (or may not) be a past, present, or future leader (or non-leader) of the Free (or any other) World. Furthermore, any perceived connection the the President of the United States is fake news and is therefore vehemently denied (or at least somewhat discouraged). So there!

More from Valvetone


Marshall - MA100H

100W of all-tube Marshall tone, 2 channels, 3 ECC83 preamp tubes, 4 EL34 power tubes, Independent volume and 3-band EQ controls per channel.

More from Marshall


Laney - AOR Pro-Tube 100

AOR Series Made in England. 100 watts all valve. Two channels.

More from Laney

HOLD Enquire

Krank - Revolution Series 1

100 watt All Valve head. Made in USA. 2 channels.

More from Krank


Laney - GH 100L

100 watt Valve head. Made in UK. 4 x EL34 Power Tubes, Toroidal Transformers and Full Valve Preamp! Made in England. GREAT TONE!

More from Laney


Valvetone - Salamanca MKIV

• Australian made, hand-wired, point-to-point.
• All valve. 8 watts. Using 2 x 6V6GT, 3 x 12AX7
• Trainwreck Express themed.
• Trainwreck 'clean to mean' performance at practical volume.
• Master Volume to control level without substantial tone changes.
• 8 and 16 ohm speaker outputs, but can also drive 4 ohm cabs.
• BRAND NEW with 12 month warranty.

More from Valvetone


Bad cat - 50R HD Custom shop

50 Watt Class A Valve head. Hand wired in the USA. Two channels. Built in tube reverb / effects loop. 4/8/16 ohm speaker output. With matching 2x12” cabinet with custom Celestion speakers voiced to the amp. Note: cab is wired for 16 ohms. w/-Footswitch

More from Bad cat


+ 20 more valve heads (40/68)