musicswopshop

Vintage early 1970’s - Made in Japan by Matsumoku - Jangly copy of a Martin F-65! Bridge pickup replaced; replacement bridge (floating rosewood bridge replaced with steel - non fixed). Plays fine but a service and rewire could really help it shine.
Easy fix-er-upper!
Regular price $300.00

Yamaha G100-112 100-watt solid-state guitar combo amplifier, made in Japan during the 1980s. Features two channels, spring reverb, 1x12 speaker and Yamaha's highly regarded clean tone with plenty of headroom. Pots are a little scratchy but seem to be coming good with a little bit of use. With castors.
Regular price $750.00

Vintage 1970’s / 1980’s Made in Japan - Laminate Spruce Top and Rosewood Back and Sides. Martin D-45 Copy. Features Three Piece Back - Abalone Inlay and Binding. *Action High but playable. Body has been scuffed/sanded roughly to give a satin finish. Pickguard is a hand cut replacement. Good Campfire Banger.
Regular price $125.00

All-in-one USB audio interface, desktop monitor speaker, and guitar amp modeler. Circa 2008 - 2013. Features unique Guitar XTracktion (GTX) software technology to cancel or extract guitar parts from standard audio tracks.
w/USB cable and manual and CD with driver software. *CHECK OS COMPATIBILITY FOR YOUR SETUP*
Regular price $100.00

T-Rex Moller 2 delivers the same classic overdrive that made its predecessor one of T-Rexs most sought-after pedals. Named after Danish guitarist Knud Moller, for whom the original pedal was designed, Moller 2 features a more durable Bass Boost toggle switch and easier-to-read control knob graphics. The pedal features a clean boost from 0 to 20 dB and a mix control that lets you dial in the perfect balance between distorted and clean signals.
Excellent condition.
Regular price $190.00

Sold via Upwey Music in Victoria, Australia - Hand Built ‘Forgotten Circuit’ Big Muff *It is a Big Muff circuit with component variance*. Made in 2020. Sounds excellent (and very much like a V7C Bubble Font Russian Big Muff)!
Vero Board / Bird Nest point to point construction without shortcuts. Quality Build. Working 100% as it should DESPITE a faulty electrolytic capacitor with clear signs of corrosion (see pics).
Easy fix for those that know how.
SOLD AS IS.
Regular price $100.00

KMA Analog Driver Pedal The Moai Maea is an analog octaver and works monophonic only, not polyphonic! That means for a clean and perfect tracking, you have to play single notes because of the analog circuit design. Keep in mind that chords will sound glitchy, but charming anyway.
Regular price $249.00

Music Swop Shop Gift Vouchers!

* NO EXPIRY! *

Click here to purchase online now!

From $10.00

Music Swop Shop T-Shirts.

Very limited! Available only in Black.

Sizes S, M, L, XL, XXL.

(Please specify size in checkout)

Regular price $30.00

*PRICE DROPPED!** Vintage 1971 - Made in U.K. 30~45 Watt All VALVE / TUBE Guitar Combo! 2 x 12 Celestion Silver Bell AlNiCo speakers!
An incredibly rare version of the 1965-1968 VOX AC30/6 TB circuit; Made by the founders post exiting VOX!
Engineered by Vox founder Tom Jennings and Circuit designer Dick Denney.
After Jennings was squeezed out of Vox, he started Jennings Electronics Industries, and with Dick Denney they started producing the JV-40 which was for all intents and purposes identical to the 1965-1968 design of the Vox AC-30/6 Top Boost Models.

The main difference is an improved tube placement (wider spacing for better heat dissipation) and the absence of a dedicated Choke transformer.
The rare variant as listed here has Organ-style Drawbars rather than rotary controls.

**NOT to be confused with the Solid State ‘J40’ or Rotary knob Tube version ‘AC40’ - This is the rarest variant created by JEI post VOX. No other featured drawbars and the Vacuum Tube circuit.**

4 x EL84 Power Tubes, GZ34 Rectifier, 12AX7 Preamps and Top Boost.

This example comes stock with its’ 2 x Original Celestion T1096 Silver Bell AlNiCo Speakers which both featuring their original voice coils, paper cones, and spider springs and are sounding incredible.
The JV-40 also features Tremolo and true Vibrato (must engage footswitch to activate).
3 Channels with 3 x separate volume controls for Vibrato, Normal and Brilliant Channels.

The vast majority of components are manufacturer original with the exception of a few electrolytic capacitors. Features Tremolo and true Vibrato (footswitchable only) and Vibrato, Normal and Brilliant Channels. All components (except for some electrolytic capacitors) are original, however, it looks like the input transformer is a previous replacement for 240 Volt operation. Footswitch is a hardwired lead (any standard latching switch will work).

240 Volts with pin adaptor on the UK style plug. Features Tremolo and true Vibrato (footswitchable only) and Vibrato, Normal and Brilliant Channels. All components (except for some electrolytic capacitors) are original. The input transformer is an old replacement for 240 Volt operation only. Footswitch is a hardwired lead (any standard latching switch will work).
Regular price $2,500.00

Vintage and RARE. Circa 1973-78 - Made in Italy by JEN/FBT.
A very rare variant in the Tonebender timeline. At first this unit appears to be the VOX V828 MkII Tonebender and indeed shares the same graphics face plate as the 2nd version V828s.
However, this particular circuit varies greatly due to its use of Silicon transistors instead of Germanium, and the introduction of a Diode clipping stage. The result a fuzz that does behave and sound like a Tonebender MKII Pro, but with more bite, more treble, a lot more available volume, and far less compression when driven hard.
The same case and circuit are found in later JEN FUZZ pedals, but it is a mystery as to whether this circuit was invented firstly to fulfil an order of VOX Tonebenders, or if it was a pre-existing JEN circuit that they later badged as VOX in order to fulfil an order (the timing of events would determine if it is a ‘legit’ Tonebender variant, or a sneaky contractural obligation fulfilment).
The JEN FUZZ can be found online featuring this exact case and circuit board but with a JEN faceplate covering the 3 x slots, and JEN Italy baseplate graphic.
All Original and very cool.
Regular price $1,500.00

Vintage 1967 January - All Valve combo.
Made in USA - THE ULTIMATE 22 WATTS From 2 x 6V6 Black Plate RCA Tubes. GZ34 Rectifier.
Speaker Replaced with a Weber Ferromax 50 Watt. External Speaker Jack removed and now houses a Mid Range Control. (Reversible if desired).
Input Transformer changed for Mercury Magnetics 240 Volt Power. Original 100 volt transformer included.
Comes with Cover (Modern) and Modern Repro Footswitch.
Regular price $8,300.00

Vintage 1967 Made in the Gibson Factory, Kalamazoo USA - Very close to all original except for; New Roller Bridge; New Pickup Covers. Neck and Bridge Pickup both original (but Bridge pickup rewound) - Original Kluson Deluxe Tuners.
Only 907 ever shipped in this colour!
No breaks no repairs.
w/non original Epiphone case.
Regular price $7,000.00

Vintage 1977 Made in the USA - All original condition! 21 Inch Short Scale - 3 pickups. Comes with original hardshell case.
Regular price $5,500.00